EMGA 921 Hydrogen Analyzer

دستگاه آنالایزر هیدروژن مدل EMGA 921 برای تعیین درصد عنصر هیدروژن در نمونه‌های جامد و معدنی مورد استفاده قرار می‌گیرد که در آن نمونه کاملا ذوب می‌شود و سپس گازهای حاصل شده توسط ذوب شدن نمونه توسط آشکارساز TCD آنالیز می‌شود. مدل‌های EMGA 821M و EMGA 821AC نیز موجود می‌باشند که در مدل M دستگاه به صورت کاملا Manual کار می‌کند و در مدل AC دستگاه دارای Automatic Cleaner می‌باشد. اما مدل EMGA 921 دستگاه‌ رده بالای کمپانی HORIBA است که مدل فول محسوب شده و Automatic Cleaner و Crucible Loader را به طور پیش فرض دارد.

Hydrogen: Thermal Conductivity detector (TCD)as H2

:Measurement range
Hydrogen: 0-0.25% *Possible to increase the range by reducing the sample weight

Sample weight: 1.0 ± 0.1g

Sensitivity (Minimum reading): Hydrogen: 0.001 ppm

(Accuracy** (Repeatability
Hydrogen σn-1≦0.04 ppm or RSD≦0.5% whichever is larger (Reference gas) ** Based on the sample weight 1.0 ± 0.1g and with automation functions described below


Measurement result: LCD or printout

Alarm message: LCD or printout

Flow sheet: LCD

Power of furnace
Inert gas fusion in impulse furnace

Enable to set the generating power 0 – 8.0 kw

Sample introduction: Dual sample/flux introduction mechanism

Automation functions: Auto cleaner, Crucible loader

:Integration conditions
Preset time integration

Integration up to reach comparator level

Preset time integration or integration up to reach comparator level, whichever is shorter

Sample ID: Enter up to 20 one-byte characters


(One point or multi point calibration (Reference gas or standard samples

Calibration using previous analysis data

Calibration curve correction function


Display of real time extraction curve

Analysis interruption

Self diagnosis and alarm display

(Analysis of extraction curve (Superposition, difference etc analysis

(Out put (RC-232C or TCP/IP

(Dimensions: 750mm(H)×785mm(D)×653mm(W
Sample introduction is positioned at 650mm from table

Weight: 230kg
(On carrying, it is divided in two units (Under 140kg/unit

Computer: PC model operating OS Windows® XP(SP2) and beyond

Main unit: AC200/220/230/240V ± 10%
(Auto cleaner: AC100V (Step-down transformer
Frequency: 50/60 ± 1Hz

Electric power consumption
(Main unit: 12kVA (MAX
(Auto cleaner: 1.5kVA (MAX

Ground resistance: Less than 10Ω

Installation condition
Operation temperature: 5-40°C
Performance temperature: 5-35°C
℃Humidity: Maximal relative humidity 80%RH between 5-31℃, linearly decrease down to 50%RH between 31-40
Vibration: Duplex amplitude 20micron and less than 0.098m/S2 accelerations at frequency band

Required gas
Ar carrier gas: Purity greater than 99.995%, Pressure 0.35MPa
Stainless steel pipe(O.D.3mm) and suitable connecter fitting within 3m of unit
Dry air or N2 as operating gas: Pressure 0.45MPa
Nylon pipe (O.D.6mm) and suitable connecter fitting within 5m of unit

(Cooling mechanism: Radiator unit (Separation type

(Electronic balance (Option
Enable connection with electronic balance with 1-0.01mg minimum display

(Optional automatic voltage regulator (AVR
Weight: 130kg